Jump to: navigation, search

GVP MCP:mpc:videotranscoder-h264-smallslicelevelthreshold
 
(7 intermediate revisions by 2 users not shown)
Line 4: Line 4:
 
|valid=A number between 0 and 51
 
|valid=A number between 0 and 51
 
|takeseffect=At start/restart
 
|takeseffect=At start/restart
−
|shortdesc=This parameter specifies level threshold for which the h264 encoder will generate small slices. The purpose of generating small slices is to improve compatiblity with devices that only support packetization-mode=0. For packetization-mode=0, small slices will result in UDP packets that are smaller than the MTU size so that fragmentation is avoided. If the h264 level is less than or equal to this value and the resolution is less than or equal to CIF, small slices will be enabled. The parameter is set to the level decimal value (eg 10 for level 1, 13 for level 1.3, etc). Setting the parameter to 0 will disable small slices. The default value is 13.
+
|shortdesc=This parameter specifies level threshold for which the h264 encoder will generate small slices. The purpose
 +
of generating small slices is to improve compatiblity with devices that only support packetization-mode=0.
 +
For packetization-mode=0, small slices will result in UDP packets that are smaller than the MTU size so that
 +
fragmentation is avoided. If the h264 level is less than or equal to this value and the resolution is less
 +
than or equal to CIF, small slices will be enabled.
 +
The parameter is set to the level decimal value (eg 10 for level 1, 13 for level 1.3, etc).
 +
Setting the parameter to 0 will disable small slices. The default value is 13.
 +
 
 
}}
 
}}
 
{{DraftOption}}
 
{{DraftOption}}
−
 
−
 
−
 
−
 
  
 
{{PubExtended}}
 
{{PubExtended}}
−
 
−
 
−
 
  
 
{{DraftExtended}}
 
{{DraftExtended}}
−
 
−
 
−
 
−
 
  
 
{{OptionCreate
 
{{OptionCreate

Latest revision as of 16:00, June 29, 2020



View in ref guide.

Edit this option          Publish this option          Clear draft content


Published Option

videotranscoder.h264.smallslicelevelthreshold

Default Value: 13
Valid Values: A number between 0 and 51
Changes Take Effect: At start/restart


This parameter specifies level threshold for which the h264 encoder will generate small slices. The purpose of generating small slices is to improve compatiblity with devices that only support packetization-mode=0. For packetization-mode=0, small slices will result in UDP packets that are smaller than the MTU size so that fragmentation is avoided. If the h264 level is less than or equal to this value and the resolution is less than or equal to CIF, small slices will be enabled. The parameter is set to the level decimal value (eg 10 for level 1, 13 for level 1.3, etc). Setting the parameter to 0 will disable small slices. The default value is 13.

Draft Option

No draft option

This page was last edited on June 29, 2020, at 16:00.
Comments or questions about this documentation? Contact us for support!