Jump to: navigation, search

GVP MCP:mpc:dtmf-singlepacket
 
(4 intermediate revisions by 2 users not shown)
Line 4: Line 4:
 
|valid=Choose between: 0 or 1
 
|valid=Choose between: 0 or 1
 
|takeseffect=At start/restart
 
|takeseffect=At start/restart
−
|shortdesc=When set to Disable, outgoing DTMF are represented by multiple (depends on mpc.dtmf.duration) RFC2833 packets followed by 3 RFC2833 packets with the End bit set. When set to Enable, outgoing DTMF are represented by a single RFC2833 packet with the End bit set.
+
|shortdesc=
 +
When set to Disable, outgoing DTMF are represented by multiple
 +
(depends on mpc.dtmf.duration) RFC2833 packets followed by
 +
3 RFC2833 packets with the End bit set. When set to
 +
Enable, outgoing DTMF are represented by a single RFC2833 packet
 +
with the End bit set.
 +
 
 
}}
 
}}
 
{{DraftOption}}
 
{{DraftOption}}

Latest revision as of 15:42, June 29, 2020



View in ref guide.

Edit this option          Publish this option          Clear draft content


Published Option

dtmf.singlepacket

Default Value: 0
Valid Values: Choose between: 0 or 1
Changes Take Effect: At start/restart


When set to Disable, outgoing DTMF are represented by multiple (depends on mpc.dtmf.duration) RFC2833 packets followed by 3 RFC2833 packets with the End bit set. When set to Enable, outgoing DTMF are represented by a single RFC2833 packet with the End bit set.

Draft Option

No draft option

This page was last edited on June 29, 2020, at 15:42.
Comments or questions about this documentation? Contact us for support!