Jump to: navigation, search

GVP MCP:vrmrecorder:sip-transport-0
Line 2: Line 2:
 
|hidden=false
 
|hidden=false
 
|default=transport0 udp:any:7090
 
|default=transport0 udp:any:7090
 +
|valid=
 
|takeseffect=At start/restart
 
|takeseffect=At start/restart
 
|shortdesc=The SIP UDP Transport used by the VRMRecorder Client. To define a transport to listen to all IPv4 interfaces, use "any" or "any4" for ip. To define a transport to listen to all IPv6 interfaces, use "any6" for ip.
 
|shortdesc=The SIP UDP Transport used by the VRMRecorder Client. To define a transport to listen to all IPv4 interfaces, use "any" or "any4" for ip. To define a transport to listen to all IPv6 interfaces, use "any6" for ip.
Line 15: Line 16:
 
|section=vrmrecorder
 
|section=vrmrecorder
 
|parameter=sip.transport.0
 
|parameter=sip.transport.0
 +
|groupid=grpMedia
 +
|groupname=Media Processing
 +
|format=string
 +
|displayname=VRMRecorder SIP UDP Transport
 
}}
 
}}
  
 
[[Category:GVP_MCP_options]]
 
[[Category:GVP_MCP_options]]

Revision as of 05:20, January 23, 2017


View in ref guide.

Edit this option          Publish this option          Clear draft content


Published Option

sip.transport.0

Default Value: transport0 udp:any:7090
Valid Values: <transport_name> <type>:<ip-address>:<port> [parameters]
Changes Take Effect: At start/restart


The SIP UDP Transport used by the VRMRecorder Client. Format: sip.transport.x = transport_name
type:ip:port

where: transport_name is any string type is udp/tcp/tls ip is the IP address of the network interface that accepts incoming SIP messages port is the port number where SIP stack accepts incoming SIP messages
If ip is an IPv6 address, [] must be used. To define a transport to listen to all IPv4 interfaces, use "any" or "any4" for ip. To define a transport to listen to all IPv6 interfaces, use "any6" for ip. Remarks: The default transport is the smallest non-empty ID. If all transport.x values are empty, UDP, TCP, and TLS transports will all be enabled and respectively listen from ports 5060, 5060, and 5061 on any network interface. TLS transport will use the certificate, x509_certificate.pem, and key, x509_private_key.pem, in the config directory. UDP will be the default transport.

Draft Option

No draft option

Comments or questions about this documentation? Contact us for support!