Jump to: navigation, search

GVP MCP:mpc:cpa-fastbusy
Line 3: Line 3:
 
|default=na_fastbusy
 
|default=na_fastbusy
 
|valid=
 
|valid=
 +
Any combination of: "na_ringback", "na_busy", "na_fastbusy", "na_sit_nocircuit", "na_sit_vacantcircuit", "na_sit_operatorintercept", "na_sit_reorder", "standard_fax", "tone1", "tone2", "tone3", "tone4", "tone5", "tone6", "tone7", "tone8", "tone9" and "tone10". Or "none".
 
|takeseffect=At start/restart
 
|takeseffect=At start/restart
 
|shortdesc=Specifies tones for CPA's fast busy pattern. Default tone value is builtin North American fast busy (NA fast busy). Value "Disable" disables fast busy detection. Valid tones include builtins and Custom tone 1 to Custom tone 10.<br /> The builtin North American fast busy has three segments. All segments are the same and are defined as follows:<br /> Segment 1: f1=460-500(Hz), f2=600-640(Hz), ontime=160-320(ms), offtime=180-320(ms)<br /> Segment 2: f1=460-500(Hz), f2=600-640(Hz), ontime=160-320(ms), offtime=180-320(ms)<br /> Segment 3: f1=460-500(Hz), f2=600-640(Hz), ontime=160-320(ms), offtime=180-320(ms)<br />
 
|shortdesc=Specifies tones for CPA's fast busy pattern. Default tone value is builtin North American fast busy (NA fast busy). Value "Disable" disables fast busy detection. Valid tones include builtins and Custom tone 1 to Custom tone 10.<br /> The builtin North American fast busy has three segments. All segments are the same and are defined as follows:<br /> Segment 1: f1=460-500(Hz), f2=600-640(Hz), ontime=160-320(ms), offtime=180-320(ms)<br /> Segment 2: f1=460-500(Hz), f2=600-640(Hz), ontime=160-320(ms), offtime=180-320(ms)<br /> Segment 3: f1=460-500(Hz), f2=600-640(Hz), ontime=160-320(ms), offtime=180-320(ms)<br />
 
}}
 
}}
 
{{DraftOption}}
 
{{DraftOption}}
 +
  
 
{{PubExtended}}
 
{{PubExtended}}
 +
 
{{DraftExtended}}
 
{{DraftExtended}}
 +
  
 
{{OptionCreate
 
{{OptionCreate

Revision as of 20:29, November 23, 2017




View in ref guide.

Edit this option          Publish this option          Clear draft content


Published Option

cpa.fastbusy

Default Value: na_fastbusy
Valid Values: Any combination of: "na_ringback", "na_busy", "na_fastbusy", "na_sit_nocircuit", "na_sit_vacantcircuit", "na_sit_operatorintercept", "na_sit_reorder", "standard_fax", "tone1", "tone2", "tone3", "tone4", "tone5", "tone6", "tone7", "tone8", "tone9" and "tone10". Or "none".
Changes Take Effect: At start/restart


Specifies tones for CPA's fast busy pattern. Default tone value is builtin North American fast busy (NA fast busy). Value "Disable" disables fast busy detection. Valid tones include builtins and Custom tone 1 to Custom tone 10.

The builtin North American fast busy has three segments. All segments are the same and are defined as follows:
Segment 1: f1=460-500(Hz), f2=600-640(Hz), ontime=160-320(ms), offtime=180-320(ms)
Segment 2: f1=460-500(Hz), f2=600-640(Hz), ontime=160-320(ms), offtime=180-320(ms)
Segment 3: f1=460-500(Hz), f2=600-640(Hz), ontime=160-320(ms), offtime=180-320(ms)

Draft Option

No draft option

Comments or questions about this documentation? Contact us for support!