Jump to: navigation, search

GVP MCP:sip:registration
 
Line 13: Line 13:
 
&lt;password&gt; - The password associated with the authentication user name. To specify an empty string please use the dash - character.<br /><br />
 
&lt;password&gt; - The password associated with the authentication user name. To specify an empty string please use the dash - character.<br /><br />
 
&lt;routeset&gt; - Route set to define the list of server(s) that the REGISTER messages should go through. Each entry separated by a comma and no space in between. If left empty, the REGISTER messages will be sent directly to the registration-server. The system will attempt to register with all defined registration entries and will periodically re-register as required by the requested-expiry parameter. The system will unregister when shutting down.<br /><br />
 
&lt;routeset&gt; - Route set to define the list of server(s) that the REGISTER messages should go through. Each entry separated by a comma and no space in between. If left empty, the REGISTER messages will be sent directly to the registration-server. The system will attempt to register with all defined registration entries and will periodically re-register as required by the requested-expiry parameter. The system will unregister when shutting down.<br /><br />
−
e.g. sip.registration = proxy1.genesyslab.com:5064 mcp@10.0.0.101 60 - -|sip:proxy2.genesyslab.com:5064 sip:mcp@10.0.0.102 60 user password
+
e.g. sip.registration = proxy1.genesyslab.com:5064 mcp@10.0.0.101 60 - -&#124;sip:proxy2.genesyslab.com:5064 sip:mcp@10.0.0.102 60 user password
  
 
}}
 
}}

Latest revision as of 13:56, December 17, 2021



View in ref guide.

Edit this option          Publish this option          Clear draft content


Published Option

registration

Default Value:
Valid Values: <registration-server> <register-as> <requested-expiry> <username> <passowrd> [<routeset>]
Changes Take Effect: At start/restart


Specifies setting for registration. The system can be configured to register with one or more SIP registration servers on the network.

The format of the value for sip.registration entries is: <registration-server> <register-as> <requested-expiry> <username> <passowrd> <routeset> All parameters except routeset are compulsory.

<registration-server> - Host/port with which to register. As the domain of the location service (e.g. genesyslab.com), the "userinfo" and "@" components MUST NOT be present. sip: and sips: can be prefixed to indicate which protocol to use. sip: will be used by default.

<register-as> - SIP identity to register as. sip: or sips: can be prefixed to indicate which protocol to use. sip: will be used by default.

<requested-expiry> - Duration of registration; system will re-register after registration expires

<username> - The user name when authentication is required by the server. This may or may not be the same as register-as.A dash - should be used if no user name is needed.Anonymous will be used if the server request authentication under this setting.

<password> - The password associated with the authentication user name. To specify an empty string please use the dash - character.

<routeset> - Route set to define the list of server(s) that the REGISTER messages should go through. Each entry separated by a comma and no space in between. If left empty, the REGISTER messages will be sent directly to the registration-server. The system will attempt to register with all defined registration entries and will periodically re-register as required by the requested-expiry parameter. The system will unregister when shutting down.

e.g. sip.registration = proxy1.genesyslab.com:5064 mcp@10.0.0.101 60 - -|sip:proxy2.genesyslab.com:5064 sip:mcp@10.0.0.102 60 user password

Draft Option

No draft option

This page was last edited on December 17, 2021, at 13:56.
Comments or questions about this documentation? Contact us for support!