SIPEP Combined Read Me
-
[+] SIP Endpoint SDK for .NET
NETReadMe
New in SIP Endpoint SDK for .NET 9.0.x Releases
[+] New in Release 9.0.0New in Release 9.0.0
The following new features were added in the 9.0.0 release:
Release 9.0.009.02
- SIP Endpoint SDK now supports UNENCRYPTED_SRTCP parameter per RFC 4568, and also understands "best-effort SRTP" (optional SRTP offer) per RFC 5939, accepting or rejecting SRTP based on the configured security policy.
- Audio statistics provided by SIP Endpoint SDK are enhanced with additional audio decoding stats, including the number of frames decoded normally, affected by Packet Loss Concealment (PLC) or Comfort Noise Generator (CNG), or with complete silence. In addition, Voice Quality alarm is raised when no RTP packets are received for a long period.
Release 9.0.008.04
- SIP Endpoint SDK now provides an API for getting SIP messages, SDP content, and negotiated codec name for the currently active session.
- SIP Endpoint SDK now provides access to incoming and outgoing audio streams for the host application.
Release 9.0.006.10
- Resilience to network events, such as IP address changes caused by PC Sleep/Wake, has been further enhanced, to ignore the configured reg_interval value when re-registering the DN with a new IP address.
- Improved detection and handling of cases when an existing device is removed/unplugged and/or a new device is added/plugged-in.
- The following options have been added to SIP Endpoint SDK:
- Updated the audio_in_device, audio_out_device, capture_device, ringer_device, and headset_name options to support regex matching for device selection.
- New options, audio and video to specify codec priorities.
- For improved security, the local IP address is no longer included in the Call-ID header of SIP messages sent by the SIP Endpoint.
Release 9.0.005.06- SIP Endpoint SDK now calculates MOS during the call duration to estimate current voice quality, and can generate an alarm when the MOS falls below the configured threshold, which notifies the user about this condition.
- SIP Endpoint SDK now supports additional optimization for the Opus codec.
Release 9.0.004.07
- SIP Endpoint SDK for .NET no longer requires Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package.
- A new log filter was added to hide DTMF data from logs.
- Outgoing calls now support ringback tones.
Release 9.0.003.05
- Resilience to network events, such as IP address changes caused by PC Sleep/Wake, VPN Connect/Disconnect and so on, has been enhanced.
- SIP message headers now include the MAC address of the host.
- TCP port ranges can be specified for client-originated connections.
Release 9.0.002.02
- SIP Endpoint SDK now supports DNS SRV resolution for the URI specified in the server parameter of the Connectivity tag. You do not need additional configuration to enable this feature, but as described in RFC 3263, you should not include the port number in the server URI.
Release 9.0.001.05
- SIP Endpoint SDK for .NET now uses the PJNATH library for improved ICE, STUN, and TURN support.
-
Updated settings for the security Section. These settings now match the naming convention of the Genesys Security Guide. For backwards compatibility, the SDK also accepts previous setting names. Note that the SDK no longer uses the tls_enabled setting.
SIP Endpoint SDK for .NET 9.0.x Readme
[+] Additional ResourcesGenesys Customer Care links:
Licensing:
- Genesys Licensing Guide
- Licensing section of the Genesys Migration Guide
Information on supported hardware and third-party software is here:
[+] Read the Legal NoticesCopyright
All Genesys software is © Copyright 2017 Genesys Cloud Services, Inc. All rights reserved.
Complete information about Genesys proprietary intellectual property, including copyrights, can be found here.
Trademarks
Genesys and the Genesys logo are registered trademarks of Genesys Cloud Services, Inc. in the U.S.A. and other countries. Complete information about Genesys proprietary intellectual property, including all trademarks, can be found here.
All other trademarks are the property of their respective owners.
Third Party Software
Genesys follows applicable third-party redistribution policies to the extent that Genesys solutions utilize third-party functionality. Please contact your customer care representative if you have any questions. The following list describes specific third-party code and functionality for this product: Documentation:SESDK:Library:NET3rdParty:9.0Source
-
[+] SIP Endpoint SDK for OSX
OSXReadMe
New in SIP Endpoint SDK for OSX 9.0.x Releases
[+] New in Release 9.0.0New in Release 9.0.0
The following new features were added in the 9.0.0 release:
Release 9.0.009.02
- SIP Endpoint SDK now supports UNENCRYPTED_SRTCP parameter per RFC 4568, and also understands "best-effort SRTP" (optional SRTP offer) per RFC 5939, accepting or rejecting SRTP based on the configured security policy.
- Audio statistics provided by SIP Endpoint SDK are enhanced with additional audio decoding stats, including the number of frames decoded normally, affected by Packet Loss Concealment (PLC) or Comfort Noise Generator (CNG), or with complete silence. In addition, Voice Quality alarm is raised when no RTP packets are received for a long period.
Release 9.0.008.04
- SIP Endpoint SDK now provides an API for getting SIP messages, SDP content, and negotiated codec name for the currently active session.
- SIP Endpoint SDK now provides access to incoming and outgoing audio streams for the host application.
- SIP Endpoint SDK now supports IPV6, NAT, ICE, TURN, STUN for Mac OS.
Release 9.0.005.06
- SIP Endpoint SDK now supports the G.729 codec on Mac OS X platform. Previously, the codec was supported only on the .NET platform.
- SIP Endpoint SDK now calculates MOS during the call duration to estimate current voice quality, and can generate an alarm when the MOS falls below the configured threshold, which notifies the user about this condition.
- SIP Endpoint SDK now supports additional optimization for the Opus codec.
Release 9.0.004.07
- A new log filter was added to hide DTMF data from logs.
- SIP Endpoint SDK now supports macOS Sierra 10.12.
- Outgoing calls now support ringback tones.
- New parameters, cipher-list and tls-crl were added to match Genesys Security Deployment Guide.
SIP Endpoint SDK for OSX 9.0.x Readme
[+] Additional ResourcesGenesys Customer Care links:
Licensing:
- Genesys Licensing Guide
- Licensing section of the Genesys Migration Guide
Information on supported hardware and third-party software is here:
[+] Read the Legal NoticesCopyright
All Genesys software is © Copyright 2017 Genesys Cloud Services, Inc. All rights reserved.
Complete information about Genesys proprietary intellectual property, including copyrights, can be found here.
Trademarks
Genesys and the Genesys logo are registered trademarks of Genesys Cloud Services, Inc. in the U.S.A. and other countries. Complete information about Genesys proprietary intellectual property, including all trademarks, can be found here.
All other trademarks are the property of their respective owners.
Third Party Software
Genesys follows applicable third-party redistribution policies to the extent that Genesys solutions utilize third-party functionality. Please contact your customer care representative if you have any questions. The following list describes specific third-party code and functionality for this product: Documentation:SESDK:Library:OSX3rdParty:9.0Source