Revision as of 20:15, January 8, 2016 by WikiAPI (talk | contribs) (Created page with "---- __NOTOC__ <!-- ==================== --> <!-- DO NOT EDIT --> =Published= {{Optionstmp |internalformid=1 (DO NOT EDIT THIS VALUE) |fromxml=true |docstatus=Published...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

GVP MCP:mpc:videotranscoder-statsresetthreshold



Published

videotranscoder.statsresetthreshold

Default value: 60000
Valid Values: A number between 1000 and 2147483647 inclusive.
Changes Take Effect: At start/restart


This parameter specifies the accumulated duration (in milliseconds) threshold at which to trigger resetting of frame rate/bit rate statistics. For example, if set to 60000, the cumulative duration used for calculating frame rate/bit rate is reset approximately every 60 seconds. The statistics is used for checking and triggering video transcoding when frame rate/bit rate exceeds the required maximum. Lower value makes the transcoding trigger more sensitive to sudden bursts that exceeds the required maximum.


Extended Description

Draft

Default value:
Valid Values:
Changes Take Effect:




Extended Description

Comments or questions about this documentation? Contact us for support!