GVP MCP:mpc:h264-in band param sets only

---

Published

• Link to option in reference manual (prodshort must be defined)

h264.in_band_param_sets_only

Default value: 0
Valid Values:
Changes Take Effect: At start/restart

This parameter specifies the utilization of sprop-parameter-sets attributes of the initial SDP offered to MCP. It does not; however, apply to any SDP offered by MCP as MCP does not send any sprop-parameter-sets in its SDP offering to another party.
When set to Disable (default), if any profile-level-id plus packetization-mode in the initial offered SDP is accepted by MCP without level downgrade, MCP will utilize the H264 parameter sets value provided by sprop-parameter-sets attributes if present and valid. Refer to H264 FMTP for more detail on how profile-level-id and packetization-mode are negotiated.
When set to Enable, MPC will not utilize any H264 parameter sets value provided by sprop-parameter-sets attributes in the offered SDP. Attribute in-band-parameter-sets=1 will be included in the response SDP for any H264 media line to explicitly declare that only parameter sets received via RTP will be utilized and that implicitly forces the offerer to include all parameter sets within RTP packets.

Draft

Default value:
Valid Values:
Changes Take Effect: