GVP MCP:mpc:rtp-videobuffersize

---

Published

• Link to option in reference manual (prodshort must be defined)

rtp.videobuffersize

Default value: 0
Valid Values: mpc.rtp.videobuffersize must be an integer that is greater than 0 and less than or equal to the maximum integer as defined by the Genesys Administrator Help.
Changes Take Effect: At start/restart

Specifies the size of the buffer used for sending RTP video data in bytes. This value should be sufficient for buffering up to 1 second of all supported modes of H263 and H264 video stream. Refer to the appropriate specification, e.g. ITU-T H.263 for H.263 and ITU-T H.264 for H.264, and GVP User Guide to determine the size to set to avoid overrunning the video buffer. If 0 is specified, buffer size will be initially set to 120000, and will be increased automatically if more space is needed.

Draft

Default value:
Valid Values:
Changes Take Effect: