GVP MCP:mpc:rtsp-localaddrv6

---

Published

• Link to option in reference manual (prodshort must be defined)

rtsp.localaddrv6

Default value:
Valid Values:
Changes Take Effect: At start/restart

Specifies the IPv6 interface to receive RTSP messages from RTSP servers. If this parameter is not specified, then the IP Address of the local system will be used. Note that most RTSP servers require this parameter and [mpc]rtsp.rtp.localaddrv6 to be configured identically.

Draft

Default value:
Valid Values:
Changes Take Effect: