GVP MCP:mpc:tiasfraction

---

Published

• Link to option in reference manual (prodshort must be defined)

tiasfraction

Default value: 100
Valid Values: tiasfraction is a percentage (out of 100) that must be an integer of value 0 or greater.
Changes Take Effect: At start/restart

When the TIAS bandwidth parameter is specified on incoming SDP, mpc.tiasfraction specifies the percentage of the TIAS bitrate that the MPC will try to achieve on the outbound media stream. If tiasfraction is 100 (default) then the MPC will try to limit the media bitrate to TIAS. In some cases it might go slightly over the TIAS limit (by perhaps one or two percent), so for safety it might be better to specify a tiasfraction value somewhat less than 100. It is possible to specify a tiasfraction greater than 100, but this is not recommended.

Draft

Default value:
Valid Values:
Changes Take Effect: