GVP MCP:sip:referxferwaitnotify

---

Published

• Link to option in reference manual (prodshort must be defined)

referxferwaitnotify

Default value: 1
Valid Values:
Changes Take Effect: At start/restart

This parameter is applicable to REFER transfer. If this is set to Enable, LMSIP2 will wait for NOTIFY with a sipflag message with a final response after receiving a 2xx REFER response. If this is set to Disable, LMSIP will not wait for NOTIFY. After that, LMSIP2 will either be sending a BYE request or expecting a BYE request from the caller depending on the value of sip.referxferwaitbye.

Draft

Default value:
Valid Values:
Changes Take Effect: