GVP MCP:mpc:dtmf-singlepacket

---

Published

• Link to option in reference manual (prodshort must be defined)

dtmf.singlepacket

Default value: 0
Valid Values:
Changes Take Effect: At start/restart

When set to Disable, outgoing DTMF are represented by multiple (depends on mpc.dtmf.duration) RFC2833 packets followed by 3 RFC2833 packets with the End bit set. When set to Enable, outgoing DTMF are represented by a single RFC2833 packet with the End bit set.

Draft

Default value:
Valid Values:
Changes Take Effect: