Revision as of 19:56, January 8, 2016 by WikiAPI (talk | contribs) (Created page with "---- __NOTOC__ <!-- ==================== --> <!-- DO NOT EDIT --> =Published= {{Optionstmp |internalformid=1 (DO NOT EDIT THIS VALUE) |fromxml=true |docstatus=Published...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

GVP MCP:mpc:rtp-maxrtppacketsize


Published

rtp.maxrtppacketsize

Default value: 0
Valid Values: mpc.rtp.maxrtppacketsize must be an integer that is greater than or equal to 0 and less than or equal to the maximum integer as defined by the Genesys Administrator Help.
Changes Take Effect: At start/restart


Specifies the maximum size of RTP packets that are sent from the platform in bytes. This also controls the maximum size of the SRTP packets being sent. If 0 is specified, there is no limit - unless internal buffer specified by rtp.audiobuffersize or rtp.videobuffersize runs out of space. Note that for SRTP, huge packet sizes (above 80KB which is greater than the typical 1500 MTU limit) may cause SRTP encryption errors before being sent out. If the problem is encountered for very large video packets, it can be worked around by negotiating lower level/bitrate or by leveraging codec specific transport mechanisms (e.g. packetization-mode=1 SDP fmtp for H264).


Extended Description

Draft

Default value:
Valid Values:
Changes Take Effect:




Extended Description

Comments or questions about this documentation? Contact us for support!