GVP MCP:mpc:dtmf-singlepacket

View in ref guide.

Edit this option          Publish this option          Clear draft content

Published Option

dtmf.singlepacket

Default Value: 0
Valid Values: Choose between: 0 or 1
Changes Take Effect: At start/restart

When set to Disable, outgoing DTMF are represented by multiple (depends on mpc.dtmf.duration) RFC2833 packets followed by 3 RFC2833 packets with the End bit set. When set to Enable, outgoing DTMF are represented by a single RFC2833 packet with the End bit set.

Draft Option

No draft option